1965 Ford 361 engine part

Tom Bateson · Regular Joined: 11 Dec 2007 Posts: 33 Report to Moderator

I am working on a 1965 Ford C-750 Cabover and need to find a good isolator plate that goes between the carburator and intake manifold. The vacuum port is broken off, and I have been unable to find one. Dealer stated that part has been disconinued. Any help locating one will be greatly appreciated.

Bob · Posted: Fri Oct 10, 2008 12:27 pm Post subject: Re: 1965 Ford 361 engine part

2 or 4 BBL carb? How thick is the plate? Aluminum or Bakelite?

Tom Bateson · Regular Joined: 11 Dec 2007 Posts: 33 Report to Moderator

2 Barrel Bakelite material approx 1 inch thick. Part has a 1/2 vacuum port on back surface for the brake chamber

Billy ky · Regular Joined: 22 Mar 2008 Posts: 44 Report to Moderator

I saw some spacers on ebay for fords..cars and trucks use same carb mounting spacing, so one from a car should work.. i don't have the link, but go to ebay and type "ford carb spacer" several are listed..

Bob · Posted: Sun Oct 12, 2008 8:43 am Post subject: Re: 1965 Ford 361 engine part

.